View Cart 0 Item

Why Built Green Certification for Remodels & Refits is Important

By Jason Legat, Founder and President of Model Remodel

Seattle is a nationwide hub for green building, especially when it comes to new construction, but the city also has an aging housing market that makes it ripe for remodel and retrofit certification. New construction projects are reaching the highest levels of Built Green, LEED, and Passive House certification, but remodels are inherently more difficult to “green up.” While updates you make in a remodel may not have your home reaching 0.6 air changes per hour, there are absolutely ways to make a home healthier and more efficient during a remodel.

For this reason, Built Green supplies both a Remodel Certification Checklist and a Home Refit Certification Checklist to help homeowners and builders focus on areas in which they can make a difference. The learning curve is low and the resources available to you are almost endless. We’ve used these checklists to make our clients’ homes more eco-friendly and durable and want to share what we’ve learned with the rest of the building community. Since you are likely already doing plenty of things that would count towards certification, with just a few changes to your products and process you can easily achieve 3- or 4-Star Built Green certification on full remodels and Built Green’s refit certification on less extensive projects. For comprehensive remodels, with sufficient planning and clear goals, 5-Star certification is absolutely obtainable if you are willing to take some extra steps such as pre-wiring for solar PV. Green remodels are real—here’s how and why you should give it a try.

Model Remodel Built Green 4-Star Remodel After

4-Star Built Green remodel by Model Remodel, photo courtesy Model Remodel

Why Certification is Important

As you know, remodeling fundamentally uses a lot of resources and creates a lot of waste. Some estimates put construction waste as high as 24% of the total U.S. waste stream. That means the work we do contributes to one of largest sources loading up landfills and also gives us incredible power to reduce that number. One of the key components of Built Green certification is preparing a simple waste reduction and recycling plan.

Green remodeling also increases home values and longevity. It’s no secret that home buyers want to buy and live in eco-friendly buildings and they seek out listings that have credible specs and certifications. Green homes can reduce their bills, signify greater durability, and give them peace of mind. One kitchen remodel may seem insignificant, but consider repeat clients. Some homeowners will come back to you for a basement remodel, then a master suite remodel, and then a new deck. By the end of five years, you’ve touched almost every part of their home and the positive effects of your green choices start to compound. Sustainability will always be about the long-term.

Certification is also important in regards to tracking green features and accomplishments. You can use the rates, percentages, and ratings to market your company as a more sustainable option. Similarly, your clients can have a tangible, credible document to show potential buyers. Built Green has a long history in the Pacific Northwest and is a respected name in both regards.

The bottom line is: healthy, green homes create minimal waste during construction, use less electricity, protect inhabitants from toxicity, and consider the well-being of the local ecosystem. If you could do all of these things by following a predetermined checklist, wouldn’t you?

Tips for Remodel and Refit Certification

As a contractor, you should determine early on that you want to aim for certification. The checklists are best accomplished through careful planning that starts before boots hit the ground. Simple design elements, such as copper pipes or a garbage disposal, could prevent you from reaching your goal. You’ll also need to schedule your third-party verifier to come out at various intervals during the project, which varies by project depending on the scope.

Projects are qualified using checklists that act as point scorecards. The checklists are organized by action categories and the remodel checklist is further organized by project phase. After completing just a few of these checklists, their content and process will feel second-nature. We recommend filling out a “goal checklist” before construction to determine what number of points, and therefore certification level, you may fall into and where you can “green up.” This will help guide your choices during the rest of the design and build processes. Know, study and refer back to these checklists—knowing the checklist items is key. In addition, your third-party verifier and the Built Green staff will be able to provide you with recommendations.

One of the largest shifts you may face is moving from a traditional dumpster company or transfer station drop to a recycling program. There are plenty of options for recycling in King County. There’s even an online guide to help you determine which materials go where and a list of recycling centers. These centers will provide load characterization reports when asked, which you’ll want to get for Built Green certification. No need to worry about cost for recycling, as the cost is virtually the same!

Here’s an example report:

Recycling report

Other areas that are important for first-time Built Green remodelers are air sealing and insulation. In our experience, insulation companies that work on any kind of new construction projects will be well-versed in the codes required for Built Green. You’ll also need to explain the value of Built Green to your crew, and check on them periodically to ensure their seals and practices are tight.

How to Frame Certification for Your Clients

When it comes to convincing clients to certify or approve your certification, there are a variety of selling points. As a contractor, the fees of verification and certification are usually a fraction of the total project cost. Enrolling in Built Green could help you secure future clients, and in that sense it is well worth the investment now if you choose to pay the fees yourself. If you’d like to approach the clients about paying for certification, it’s easy to point to added home value, environmental impact, and improved home health. These three points are usually enough to convince Pacific Northwest homeowners to certify, but it’s all about presentation. Your clients don’t know what they don’t know. You’ll need to educate them on how homes are built and how certification affects them as the people who will live in and perhaps eventually sell the home. Different reasons for certification will appeal to different people, so be sure to touch on them all.

The majority of people will respond well to hearing about energy savings and home value increases. Depending on the client, you may want to start there. Homeowners can reduce their energy bills by insulating beyond code and purchasing efficient appliances—both items on the Built Green checklists. It can be as simple as installing dimmer or motion-activated light switches, which allow you to use less light and therefore less electricity—or choosing WaterSense low flow shower heads and faucets. These upgrades may be slightly more expensive, but in the long-term clients will see the savings in their energy and water bills. It’s possible these upgrades may even cost less: recommend that homeowners look for local and federal tax incentives and rebates that are readily available, but rarely sought out, such as those offered by Puget Sound Energy and Seattle City Light.

Also educate homeowners on the sales value. A recent study found that “high-performance” energy and resource-conserving homes have, on average, a premium of 3.46% when compared to similar homes in size and location. That’s thousands of dollars in added value to your home! If your clients plan on selling anytime soon, having efficient products is a major selling point. Having a physical certificate of green building makes for a great item to show at an open house and hand over to the new owner and the Northwest Multiple Listing Service will require a certificate in order to list a home as a green home.

The health of the home is also going to appeal to homeowners. Having some stats to share with your clients will help make the case:

  • Checklist item: Ensure a shoe removal vestibule at major entrances to house (front, back, garage) = 3 Possible Points
    Shoes carry all types of bacteria, toxins, and dirt. Shoes can carry an average of 421,000 types of bacteria, including e-coli and toxins used in lawn care. Having a designated removal and storage area for shoes will ensure many of those germs do not make it into your home. If you’re working on the entryway or garage of a home, it’s the perfect time to start healthier shoe habits.
  • Checklist item: Use only low-VOC/low-toxic interior paints and finishes for all surface areas (including doors, windows, trim) = 5 Possible Points
    The EPA estimates that indoor air is two to ten times more polluted than outdoor air. Everything from wall paint to carpet can emit volatile organic compounds (VOCs), which are vapor and gases that pollute the air and may be known carcinogens. Many carcinogens are linked to deteriorating health conditions, including cancer. Happily, low-VOC products are easy to find.
  • Checklist item: Use a non-toxic mold inhibitor to prevent future mold = 2 Possible Points
    Here in the Pacific Northwest, we get a large amount of rain, requiring builders and homeowners to take extra precautions to prevent mold. Humidity and poor sealing can be a terrible combination. Mold is difficult and costly to get rid of and can lead to health problems. Inhibitor sprays can be used during the construction process to avoid mold problems that may otherwise develop.

Sharing facts and checklist items such as these with your clients will show how knowledgeable you are, and assure them that you have their best interests in mind.

Built Green Refit by Model Remodel: Before ⒸCindy Apple Photography
Built Green Refit by Model Remodel: After ⒸCindy Apple Photography

Built Green Refit by Model Remodel, before and after. ⒸCindy Apple Photography

The final appeal will come from an environment standpoint. Homeowners know that they can use rechargeable batteries and separate food waste for composting—things that happen when they’re already living in the finished home. What they don’t know is how much the building industry affects the environment. A cheaper product now could mean a high environmental cost in production and disposal. These are less tangible costs, but it's important to think about the entire lifecycle of a product! Again, being transparent and sharing information with your clients will help them make better decisions and they’ll be thankful for the enlightenment.

Let them know the difference between demolition and deconstruction. Demolition is the action or process of forcefully tearing down. Deconstruction is the dismantling of something into its constituent parts. The latter provides opportunity for items to be reused or repurposed. There are plenty of building salvage stores around the Seattle area, such as Ballard Reuse or Second Use, that will resell your old cabinets or lights. Where the material ends up is just as important as where it comes from, so urge your clients to see the value in recycling what can’t be upcycled.

Second, there’s an ever-growing selection of eco-friendly appliances, materials, and furnishings. There’s an eco-friendly solution for almost everything inside and outside the home, so name a few options to get the wheels turning: IceStone recycled glass countertops, TREX decking, Ducoterra heating panels, Forbo Marmoleum, etc. Recommend that clients visit retailers such as Greenhome Solutions, a local showroom for green building options, so that they can learn more and get ideas. Do your research on items you know the client will need (kitchen remodels will need cabinets, tile, floor and lights—so research eco-friendly options for those things when presenting the design).

The Built Green checklists for Remodels and Refits are tremendously thorough guides for healthier homes. Focusing on space utilization, better products, and careful building practices, they make certification for remodeling projects attainable. As remodelers, we’re so thankful this program is in place to help us make positive contributions to the environment and bring more value to our clients. We hope our tips are helpful for contractors new to this process and we’re happy to answer any questions our fellow contractor professionals have. Just because you’re not building a new home doesn’t mean you can’t be eco-friendly. Great options are out there for the choosing and every little bit helps!

 

You May Also Like

Card image cap Built Green™

08/10/2017

Why Third-Party Verification?

Card image cap Built Green™

11/16/2017

Habitat for Humanity Builds Green

Card image cap Built Green™

04/02/2019

Sterling Real Estate Group: 5-Star Family Home